AllenFilters

ALLEN FILTERS, INC. has a long history of reliable products for straining, filtering and reconditioning fluids in industrial applications. Their products have been widely used to clean:

                                        Cutting Oils                     Liquid Chemicals
                                        Edible Oils                       Quench Oils
                                        Fuels                                Rolls and Stamping Press Oils
                                        Hydraulic Oils                 Transformer Insulating Oils
                                        Lubricating Oils              Coolants

The equipment manufactured to accomplish this are:
        Cartridge Type Filters          - bypass and full flow
        Strainers                                - single basket and multiple element
        Oil Conditioning Systems     - employ gravity, filtration, heat, vacuum, absorption
                                                             media and additive replacement technology.

A variety of filter cartridges are manufactured in many different sizes. Barrier type multiple stacked discs are used in most full flow applications while annular packed, depth cartridges with high dirt holding capacity are applied to most bypass units. Packed designs using fullers earth and other materials are sometimes applied in applications treating acidic conditions or specific absorption sensitive contaminants. Multi layer, pleated and reinforced wire mesh is used to construct strainer baskets and cartridges.

Full Flow Filters

Flows to 2000 gallons per minute.
ASME Code and non-Code vessel designs.
Duplex units available with non-interruptible flow, transfer
valves.
Swingbolt cover clamping with cover lifters where necessary.
Internal pressure relief valves, if required.
Insulated electric, steam or hot water, wrap around heating
elements available.
Instrumentation options can be provided.

Bypass Filters

Flows from 1 1/2 gallons per minute.
ASME Code and non-Code vessel designs.
Swingbolt cover clamping with cover lifters where necessary.
Internal pressure relief valves.
Insulated electric, steam or hot water, wrap around heating
elements available.
Pumps, instrumentation, sub-bases or portable bases can be included, if required.

Strainers

Flows to 3000 gallons per minute.
ASME Code and non-Code vessel designs.
Swingbolt cover clamping with cover lifers where necessary.
Duplex units available with non-interruptible flow transfer
valves.
Stainless steel and monel elements thread into place.
Bolt-on top cap for easy internal access for element cleaning.
High dirt capacity with a variety of particle selection media
available.
100 PSIG + differential capability.
Instrumentation packages can be provided.

Conditioning Systems

Reduce fluid disposal and replacement costs.
Custom designed systems to handle your fluid contaminant loading.
6 to 2400 gallons per hour rate.
Solids removal to 0.5 micron.
Water content to less than 10 PPM.
Air and gases below 0.1%.
Boils off and collects volatile solvents and contaminants.
Neutralize acids and oxidation products.
Manual or fully automatic system operation.
Stationary units for treating large storage or circulating tanks.
Portable designs for over the road or in shop movement. A single unit can be used for sequenced preventative maintenance at multiple fluid operation locations.
Energy saving heat recovery packages available.
Reels and racks for hoses, power cables, etc. can be build into portable units.

Brochures

Please indicate the brochures you want and they will be mailed to you.
If you have specific questions or applications, contact us by phone, fax or e-mail.

ByPass Oil Filters	Full Flow Oil Filters
Strainers	Oil Conditioning System